Online 350-601 Test Brain Dump Question and Test Engine [Q52-Q73]

Online 350-601 Test Brain Dump Question and Test Engine

Real Cisco 350-601 Exam Dumps with Correct 455 Questions and Answers

NEW QUESTION # 52
An engineer changed a configuration and must perform a rollback. Which statement applies to a Cisco Nexus
5600 Series switch?

A. A system checkpoint is generated automatically when the running configuration is saved to NVRAM.
B. A user who is assigned to the network-operator user role can perform a rollback.
C. Errors are skipped when an atomic rollback type is triggered.
D. The configuration rollback functionality is disabled when FCoE is enabled.

Answer: D

Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/system_management/503_n1_1/ cisco_n5k_system_mgmt_cg_rel_503_n1_1_chapter11.pdf
https://www.google.com/url?sa=t&source=web&rct=j&url=https://www.cisco.com/c/en/us/td/docs/switches/ datacenter/nexus5000/sw/system_management/503_n1_1/ cisco_n5k_system_mgmt_cg_rel_503_n1_1_chapter11.pdf&ved=2ahUKEwjQ8ubTuK3xAhWm3jgGHZ9gB
0oQFjAAegQIBRAC&usg=AOvVaw2j0nnvXiChAoVooxX2Qx0g

NEW QUESTION # 53
Refer to the exhibit.

What is the reason the system-fm-vrrp checkpoint was created?

A. The VRRP service restarted and the checkpoint was automatically created.
B. The VRRP process crashed and the checkpoint was automatically created.
C. The VRRP-enable feature has been disabled.
D. The network administrator manually created it.

Answer: C

Explanation:
automatically created by the Nexus when the vrrp feature is disabled

NEW QUESTION # 54
Which mroute state is created when Bidirectional PIM is deployed at a site?

A. S,G
B. *,G
C. MVPN Type-6
D. MVPN Type-7

Answer: B

Explanation:
Bidirectional PIM has been invented for networks where we have many sources and receivers talking to each other. PIM Sparse mode RP builds 2 entries *, G and S, G but when we use PIM bidirectional mode, the RP will never build a S,G entry and, it only allow the *,G entry. https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipmulti_pim/configuration/xe-16-5/imc-pim-xe-16-5-book/imc-tech-oview.html and https://networklessons.com/multicast/multicast-bidirectional-pim

NEW QUESTION # 55
Drag and drop the characteristics from the left onto the correct storage systems on the right.

Answer:

Explanation:

Explanation

2,4,5 - NAS 1,3 - SAN

NEW QUESTION # 56
Refer to the exhibit.

Which command needs to be added to the line starling with the "file" keyword to have the generated running-config file with the name 'fusion-config_' and current date?

A. string(('fusion-config_') + date)
B. str.('fusion-config_') + date
C. ('fusion-config_') + date
D. ('fusion-config_ + date')

Answer: B

NEW QUESTION # 57
An engineer has a primary fabric that is named UCS-A and a secondary fabric that is named UCS-B. A certificate request that has a subject name of sjc2016 for a keyring that is named kr2016 needs to be created.
The cluster IP address is 10.68.68.68. Which command set creates this certificate request?
A)

B)

C)

D)

A. Option B
B. Option D
C. Option A
D. Option C

Answer: D

NEW QUESTION # 58
What are two types of FC/FCoE oversubscription ratios? (Choose two.)

A. edge ISL bandwidth to core ISL bandwidth
B. port bandwidth to uplink bandwidth
C. switch processing power to end-node processing power
D. host bandwidth to storage bandwidth
E. server storage to end-node count

Answer: A,D

NEW QUESTION # 59
An engineer creates a service profile in Cisco UCS Manager and must assign a policy that reboots blades when changes are applied. The changes must be applied only after user acknowledgment. Which two policies must be configured to meet these requirements? (Choose two.)

A. Maintenance Policy
B. Reboot Policy
C. Power Control Policy
D. Boot Policy
E. Global Policy

Answer: A,B

Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Admin-Managem

NEW QUESTION # 60
An administrator is implementing DCNM so that events are triggered when monitored traffic exceeds the configured present utili zation threshold. The requirement is to configuration a maximum limit of 39860437 bytes that applies directly to the statistics collected as a ratio of the total link capacity. Which DCNM performance monitoring configuration parameter must be implemented to achieve this result?

A. Per port Monitoring
B. Baseline
C. Utill%
D. Absolution Values

Answer: D

NEW QUESTION # 61
A customer reports Fibre Channel login requests to a cisco MDS 9000 series Switch from an unauthorized source. The customer requires a feature that will allow all devices already logged in and learned in and learned to be added to the Fibre channel active database. Which two features must be enabled to accomplish this goal? (Choose two.)

A. Port security
B. Enhanced zoning
C. Auto-learning
D. Device aliases
E. Smart aliases

Answer: A,C

Explanation:
https://www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/rel_3_x/configuration/guides/fm_3_3_1/psec.html Port Security Activation By default, the port security feature is not activated in any switch in the Cisco MDS 9000 Family. By activating the port security feature, the following apply: Auto-learning is also automatically enabled, which means: From this point, auto-learning happens for the devices or interfaces that were already logged into the switch and also for the new devices will login in future. You cannot activate the database until you disable auto-learning. All the devices that are already logged in are learned and are added to the active database. All entries in the configured database are copied to the active database. After the database is activated, subsequent device login is subject to the activated port bound WWN pairs, excluding the auto-learned entries. You must disable auto-learning before the auto-learned entries become activated.

NEW QUESTION # 62
An engineer troubleshoots an Fibre Channel deployment on a Cisco MDS 9000 Series Switch. What does this output indicate about port channel 1?

A. Port channel 1 is configured to connect to an NPIV switch.
B. Port channel 1 is configured to be an ISL.
C. Port channel 1 is configured to connect to an NPV switch.
D. Port channel 1 is configured to connect to a host bus adapter.

Answer: B

NEW QUESTION # 63
Drag and drop the network assurance concepts from the left onto the corresponding benefits on the right.

Answer:

Explanation:

Explanation
Diagram Description automatically generated

NEW QUESTION # 64
Which two actions must be taken to directly connect a Fibre Channel storage array to a Cisco UCS domain? (Choose two.)

A. Configure a Fibre Channel port channel
B. Create a new vHBA dedicated to the storage array
C. Configure a new VSAN
D. Create a Storage Connection Policy
E. Configure the Fibre Channel poet as a Fibre Channel storage port

Answer: C,E

NEW QUESTION # 65
An engineer is configuring AAA authentication on an MDS 9000 switch. The LDAP server is located under the IP 10.10.2.2. The data sent to the LDAP server should be encrypted. Which command should be used to meet these requirements?

A. Idap-server 10.10.2.2 port 443
B. Idap server host 10.10.2.2 key SSL_KEY
C. Idap-server host 10.10.2.2 enable-ssl
D. Idap-server 10.10.2.2 key SSL_KEY

Answer: C

Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/6_2/configuration/guides/security/nx-os/sec_cli_6-x/cradtac1.html

NEW QUESTION # 66
Refer to the exhibit.

Drag and drop each traffic flow type from the left onto the corresponding number on the right Not all traffic flow types are used

Answer:

Explanation:

NEW QUESTION # 67
A network engineer must determine the cooling requirements for a Cisco UCS C-Series Rack Server. The server with PCIe cards is configured with a fan configuration policy. Which configuration should be used for the fan policy of the server?

A. Option C
B. Option A
C. Option B
D. Option D

Answer: B

NEW QUESTION # 68
A customer data center is configured for distribution of user roles, call home, and NTP. The data center was split into two geographically separate locations called DC1 and DC2. The requirement is for the user role configurations to be distributed in DC1 and for NTP and call home features to be constrained to DC2. Which two configuration sets must be used to meet these requirements? (Choose two.)

A. Option D
B. Option C
C. Option B
D. Option A
E. Option E

Answer: A,E

Explanation:
This is a confusing question actually. But I selected DE because they have "cfs region x". configuration without keyword region should not be accepted on the switch. Please test that on a nexus switch.
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/4_2/nx-os/system_management/configuration/guide/sm_nx_os_cli/sm_2cfs.html

NEW QUESTION # 69
Refer to the exhibit.

Refer to the exhibit The communication between the web server and the application server experiences poor performance The network engineer must collect the traffic between the two servers, including the payload for more investigation The collected data must be sent from the remote site to the headquarters. Which action accomplishes this goal?

A. Configure a SPAN session between N5K-1 and N5K-2
B. Configure SNMP on N5K-1 to send the data to the monitor server
C. Configure NetFlow on N5K-1 to send the data to the monitor server
D. Configure an ERSPAN session between N5K-1 and N5K-2.

Answer: D

NEW QUESTION # 70
An engineer is configuring a backup operation on the existing Cisco UCS environment using a logical configuration. Which configuration is expected to be saved by using this backup type?

A. service profiles
B. servers
C. roles
D. systems

Answer: A

Explanation:

https://www.cisco.com/en/US/docs/unified_computing/ucs/sw/gui/config/guide/141/ UCSM_GUI_Configuration_Guide_141_chapter43.html

NEW QUESTION # 71
A network engineer must implement RBAC on Cisco MDS 9000 Series Multilayer Switches.
Drag and drop the Cisco MDS 9000 Series roles from the left onto the correct categories on the right.