NSE7_SDW-6.4 PDF Dumps May 19, 2023 Exam Questions – Valid NSE7_SDW-6.4 Dumps
Ultimate NSE7_SDW-6.4 Guide to Prepare Free Latest Fortinet Practice Tests Dumps
The Fortinet NSE7_SDW-6.4 exam is a certification exam that tests the skills and knowledge of IT professionals in the area of software-defined wide area network (SD-WAN) technology. The exam is designed to evaluate the ability of candidates to design, implement, and manage an SD-WAN solution using Fortinet technologies. Successful completion of the exam leads to the Fortinet NSE 7 - SD-WAN 6.4 certification, which demonstrates a high level of expertise in the field of SD-WAN.
NEW QUESTION # 13
Refer to the exhibit.
Based on the output shown in the exhibit, which two criteria on the SD-WAN member configuration can be used to select an outgoing interface in an SD-WAN rule? (Choose two.)
- A. Set priority 10.
- B. Set load-balance-mode source-ip-ip-based.
- C. Set cost 15.
- D. Set source 100.64.1.1.
Answer: D
NEW QUESTION # 14
Refer to the exhibit.
Based on the output shown in the exhibit, which two criteria on the SD-WAN member configuration can be used to select an outgoing interface in an SD-WAN rule? (Choose two.)
- A. Set source 100.64.1.1.
- B. Set load-balance-mode source-ip-ip-based.
- C. Set cost 15.
- D. Set priority 10.
Answer: C,D
NEW QUESTION # 15
Which diagnostic command you can use to show interface-specific SLA logs for the last 10 minutes?
- A. diagnose sys virtual-wan-link intf-sla-log
- B. diagnose sys virtual-wan-link sla-log
- C. diagnose sys virtual-wan-link log
- D. diagnose sys virtual-wan-link health-check
Answer: B
Explanation:
Explanation/Reference: https://docs.fortinet.com/document/fortigate/6.2.0/cookbook/943037/sla-logging
NEW QUESTION # 16
Which components make up the secure SD-WAN solution?
- A. Datacenter, branch offices, and public cloud
- B. Telephone, ISDN, and telecom network.
- C. FortiGate, FortiManager, FortiAnalyzer, and FortiDeploy
- D. Application, antivirus, and URL, and SSL inspection
Answer: D
NEW QUESTION # 17
Which statement about using BGP routes in SD-WAN is true?
- A. Adding static routes must be enabled on all ADVPN interfaces.
- B. Dynamic routing protocols can be used only with non-encrypted traffic
- C. VPN topologies must be form using only BGP dynamic routing with SD-WAN
- D. Learned routes can be used as dynamic destinations in SD-WAN rules
Answer: D
NEW QUESTION # 18
What is the lnkmtd process responsible for?
- A. Monitoring links for any bandwidth saturation
- B. Processing performance SLA probes
- C. Flushing route tags addresses
- D. Logging interface quality information
Answer: B
NEW QUESTION # 19
When attempting to establish an IPsec tunnel to FortiGate, all remote users match the FIRST_VPN IPsec VPN. This includes remote users that want to connect to the SECOND_VPN IPsec VPN. Which two configuration changes must you make on both IPsec VPNs so that remote users can connect to their intended IPsec VPN? (Choose two.)
- A. Configure a unique peer ID.
- B. Change the IKE mode to aggressive.
- C. Configure different Diffie Hellman groups.
- D. Configure different proposals.
Answer: A,B
Explanation:
https://kb.fortinet.com/kb/documentLink.do?externalID=10114
NEW QUESTION # 20
What are two reasons why FortiGate would be unable to complete the zero-touch provisioning process? (Choose two.)
- A. A factory reset performed on FortiGate.
- B. The FortiGate cloud key has not been added to the FortiGate cloud portal.
- C. FortiDeploy has connected with FortiGate and provided the initial configuration to contact FortiManager
- D. The zero-touch provisioning process has completed internally, behind FortiGate.
- E. FortiGate has obtained a configuration from the platform template in FortiGate cloud.
Answer: B,D
NEW QUESTION # 21
An administrator is troubleshooting VoIP quality issues that occur when calling external phone numbers The SD-WAN interface on the edge FortiGate is configured with the default settings, and is using two upstream links One link has random jitter and latency issues and is based on a wireless connection Which two actions must the administrator apply simultaneously on the edge FortiGate to improve VoIP quality using SD_WAN rules?
- A. Select the corresponding SD-WAN balancing strategy in the SD-WAN rule.
- B. Place the troublesome link at the top of the interface preference list.
- C. Configure an SD-WAN rule to load balance all traffic without VoIP.
- D. Choose the suitable interface based on the interface cost and weight.
- E. Use the performance SLA targets to detect latency and jitter instantly.
Answer: A,E
NEW QUESTION # 22
Which statement defines how a per-IP traffic shaper of 10 Mbps is applied to the entire network?
- A. The 10 Mbps bandwidth is shared equally among the IP addresses.
- B. FortiGate allocates each IP address a maximum 10 Mbps of bandwidth.
- C. A single user uses the allocated bandwidth divided by total number of users.
- D. Each IP is guaranteed a minimum 10 Mbps of bandwidth
Answer: B
NEW QUESTION # 23
Refer to exhibits.
Exhibit A.
Exhibit B.
Exhibit A shows the SD-WAN performance SLA and exhibit B shows the SO-WAN interface and the static routes configuration.
Port1 and port2 are member interfaces of the SD-WAN, and port2 becomes a dead member after reaching the failure thresholds Which statement about the dead member is correct?
- A. Subnets 100 .64-1.0/23 and 172 . 20 . 0. 0/16 are reachable only through port1
- B. Port2 might become alive when a single response is received from an SLA server
- C. SD-WAN interface becomes disabled and port1 becomes the WAN interface
- D. Dead members require manual administrator access to bring them back alive
Answer: C
NEW QUESTION # 24
Which statement is correct about the SD-WAN and ADVPN?
- A. Spoke support dynamic VPN as a static interface.
- B. ADVPN interface can be a member of SD-WAN interface.
- C. Hub FortiGate is limited to use ADVPN as SD-WAN member interface.
- D. Dynamic VPN is not supported as an SD-Wan interface.
Answer: B
NEW QUESTION # 25
Which statement reflects how BGP tags work with SD-WAN rules?
- A. VPN topologies are formed using only BGP dynamic routing with SD-WAN
- B. BGP tags require that the adding of static routes be enabled on all ADVPN interfaces
- C. Route tags are used for a BGP community and the SD-WAN rules are assigned the same tag
- D. BGP tags match the SD-WAN rule based on the order that these rules were installed.
Answer: A
NEW QUESTION # 26
Which diagnostic command can you use to show the SD-WAN rules interface information and state?
- A. diagnose sys virtual-wan-link member.
- B. diagnose sys virtual-wan-link neighbor.
- C. diagnose sys virtual-wan-link route-tag-list
- D. diagnose sys virtual-wan-link service
Answer: B
NEW QUESTION # 27
Which statement reflects how BGP tags work with SD-WAN rules?
- A. BGP tags require that the adding of static routes be enabled on all ADVPN interfaces
- B. Route tags are used for a BGP community and the SD-WAN rules are assigned the same tag
- C. VPN topologies are formed using only BGP dynamic routing with SD-WAN
- D. BGP tags match the SD-WAN rule based on the order that these rules were installed.
Answer: B
Explanation:
SD-WAN 6.4.5 Guide Page 226-227.
NEW QUESTION # 28
Refer to the exhibit.
What must you configure to enable ADVPN?
- A. Each VPN device has a unique pre-shared key configured separately on phase one
- B. The protected subnets should be set to address object to all (0.0 .0. o/o).
- C. On the hub VPN, only the device needs additional phase one sett
- D. ADVPN should only be enabled on unmanaged FortiGate devices.
Answer: A
NEW QUESTION # 29
......
Passing Key To Getting NSE7_SDW-6.4 Certified Exam Engine PDF: https://vcepractice.pass4guide.com/NSE7_SDW-6.4-dumps-questions.html