Latest Success Metrics For Actual HPE6-A73 Exam (Updated 124 Questions)
Genuine HPE6-A73 Exam Dumps Free Demo Valid QA's
HPE6-A73 certification is recognized globally and is highly valued by employers. It is designed for professionals who want to enhance their skills and knowledge in network switching and advance their careers. Aruba Certified Switching Professional Exam certification validates the skills of professionals in designing, implementing, and managing complex network switching solutions using Aruba technologies. It also demonstrates their ability to troubleshoot complex network issues and provide solutions to ensure the smooth operation of network infrastructure.
NEW QUESTION # 53
A network administrator is implementing BGP for a larger network. The network has over 20 exit points across 15 different BGP routers. The administrator does not want to implement a fully-meshed iBGP peering between all BGP routers.
Which feature should the administrator implement to reduce the number of peers the administrator needs to define?
- A. Peer-Groups
- B. Next-hop-self
- C. Route reflectors
- D. BFD
Answer: A
NEW QUESTION # 54
Examine the AOS-CS switch output:
Based on this output, what is correct?
- A. 802.1X authentication was successful, but MAC authentication is yet to start
- B. A local user role was deployed using a ClearPass solution
- C. 802.1X authentication occurred and downloadable user roles are deployed
- D. Only 802.1X authentication is configured on the port
Answer: C
NEW QUESTION # 55
How is voice traffic prioritized correctly on AOS-CX switches?
- A. By implementing weighted fair queueing (WFQ)
- B. By implementing voice VLANs
- C. By defining device profiles with QOS settings
- D. By placing it in the strict priority queue
Answer: B
NEW QUESTION # 56
Which AOS-CX switches support weighted fair queuing (WFQ)?
- A. 6300 only
- B. 8400 only
- C. Both 8320 and 8325
- D. Both 6300 and 6400
Answer: B
NEW QUESTION # 57
A network engineer is having a problem adding a custom-written script to an AOS-CX switch's NAE GUI. The script was written in Python and was successfully added on other AOS-CX switches. The engineer examines the following items from the CLI of the switch:
What should the engineer perform to fix this issue?
- A. Remove a script that is no longer used before installing the new script
- B. Install the script's signature before installing the new script
- C. Enable trust settings for the AOS-CX switch's SSL certificate
- D. Ensure the engineer's desktop and the AOS-CX switch are synchronized to the same NTP server
Answer: A
NEW QUESTION # 58
How js voice traffic prioritized correctly on AOS-CX switches'?
- A. By placing tt in the strict priority queue
- B. By implementing weighted fair queueing (WFQ)
- C. By implementing voice VLANs
- D. By defining device profiles with QOS settings
Answer: C
NEW QUESTION # 59
Examine the network exhibit.
A company has a guest implementation for wireless and wired access. Wireless access is implemented through a third-party vendor. The company is concerned about wired guest traffic traversing the same network as the employee traffic. The network administrator has established a GRE tunnel between AOS-CX switches where guests are connected to a routing switch in the DMZ.
Which feature should the administrator implement to ensure that the guest traffic is tunneled to the DMZ while the employee traffic is forwarded using OSPF?
- A. OSPF route maps using the "set metric" command
- B. User-based tunneling (UBT)
- C. Policy-based routing (PBR)
- D. Classifier policies
Answer: C
NEW QUESTION # 60
A network administrator is installing NetEdit. In order for NetEdit to manage the AOS-CX switches in the network, what must be defined on the AOS-CX switches? (Choose two.)
- A. Defining an admin user password
- B. Enabling the RESTful API for read and write access
- C. Enabling telnet
- D. Defining the https user-group
- E. Enabling SFTP
Answer: A,B
NEW QUESTION # 61
An administrator is implementing a multicast solution in a multi-VLAN network. Which statement is true about the configuration of the switches in the network?
- A. IGMP must be enabled on all interfaces where multicast sources and receivers are connected
- B. IGMP snooping must be enabled on all interfaces on a switch to intelligently forward traffic
- C. IGMP requires join and leave messages to graft and prune multicast streams between switches
- D. IGMP must be enabled on all routed interfaces where multicast traffic will traverse
Answer: C
NEW QUESTION # 62
Examine the network exhibit:
The ACL configuration defined on Core-1 is as follows:
If telnet was being used, which device connection would be permitted and functional in both directions?
(Choose two.)
- A. Client 1 to Client 2
- B. Client 3 to Client 2
- C. Client 1 to Client 3
- D. Server 2 to Client 2
- E. Server 1 to Client 1
Answer: A,E
NEW QUESTION # 63
An administrator of a large campus network needs a solution that will provide root cause analytics to quickly identify problems so that they can quickly be fixed.
Which AOS-CX switch feature should the administrator utilize to help with root cause analytics?
- A. NetEdit
- B. VSX
- C. VoQ
- D. NAE
Answer: D
NEW QUESTION # 64
The network is configured for OSPF with the following attributes:
Core1 and Core2 and ABRs
Area 1 has 20 networks in the 10.1.0.0/16 range
Area 0 has 10 networks in the 10.0.0.0/16 range
Area 2 has 50 networks in the 10.2.0.0/16 range
The ASBR is importing a static route into Area 1
Core2 has a summary for Area 2: area 0.0.0.2 range 10.2.0.0/16 type inter-area Here is the OSPF configuration performed on Core1:
Based on the above information, what is correct?
- A. Core1 has received one LSA Type 5 from the ASBR
- B. Core1 has no OSPF routes
- C. Area 1 has 23 routes
- D. Area 0 has 13 routes
Answer: C
NEW QUESTION # 65
A network engineer is having a problem adding a custom-written script to an AOS-CX switch's NAE GUI.
The script was written in Python and was successfully added on other AOS-CX switches. The engineer examines the following items from the CLI of the switch:
What should the engineer perform to fix this issue?
- A. Remove a script that is no longer used before installing the new script
- B. Install the script's signature before installing the new script
- C. Enable trust settings for the AOS-CX switch's SSL certificate
- D. Ensure the engineer's desktop and the AOS-CX switch are synchronized to the same NTP server
Answer: A
NEW QUESTION # 66
Examine the network exhibit.
A company has a guest implementation for wireless and wired access. Wireless access is implemented through a third-party vendor. The company is concerned about wired guest traffic traversing the same network as the employee traffic. The network administrator has established a GRE tunnel between AOS-CX switches where guests are connected to a routing switch in the DMZ.
Which feature should the administrator implement to ensure that the guest traffic is tunneled to the DMZ while the employee traffic is forwarded using OSPF?
- A. OSPF route maps using the "set metric" command
- B. Classifier policies
- C. User-based tunneling (UBT)
- D. Policy-based routing (PBR)
Answer: C
NEW QUESTION # 67
A company is implementing a new wireless design and needs it to support high availability even during times of switch system upgrades. The solution will involve Aruba Mobility Controller (MC) and Aruba AP connections requiring POE Which campus AOS-CX switch solution and virtual switching should the company implement at the campus access layer?
- A. AOS-CX 8325 and VSF
- B. AOS-CX 8400 and VSX
- C. AOS-CX 6300 and VSF
- D. AOS-CX 6400 and VSX
Answer: C
NEW QUESTION # 68
A network has two AOS-CX switches connected to two different service providers The administrator is concerned about bandwidth consumption on the service provider links and learned that the service providers were using the company as a transit AS.
Which feature should the administrator implement to prevent this situation?
- A. Configure route maps and apply them to BGP
- B. Configure the two switches as route reflectors.
- C. Configure a classifier policy to disable MED.
- D. Configure bi-directional forwarding detection on both switches.
Answer: A
NEW QUESTION # 69
An administrator will be replacing a campus switching infrastructure with AOS-CX switches that support VSXcapabilities. The campus involves a core, as well as multiple access layers. Which feature should the administrator implement to allow both VSX-capable core switches to process traffic sent to the default gateway in the campus VLANs?
- A. IP helper
- B. VRF
- C. VRRP
- D. Active gateway
Answer: C
NEW QUESTION # 70
An administrator is managing a network comprised of AOS-CX switches deployed at the aggregation layer. The switches are paired in a VSX stack and run the OSPF routing protocol. The administrator is concerned about how long it takes for OSPF to converge when one of the VSX switches has to reboot.
What should the administrator to do speed up the OSPF convergence of the switch that is rebooting?
- A. Implement graceful restart on the VSX switches and their neighboring OSPF switches.
- B. Change the VSXISL link from an OSPF broadcast link point-to-point.
- C. Decrease the VSX initial synchronization timer on the two VSX switches.
- D. Define non-backbone areas on the VSX switches as totally stubby areas.
Answer: A
NEW QUESTION # 71
How does PIM build the IP multicast routing table to route traffic between a multicast source and one or more receivers?
- A. It uses IGMP and calculates a shortest path tree (SPT)
- B. It uses the shortest path first (SPF) algorithm derived from link state protocols
- C. It uses the unicast routing table and reverse path forwarding (RPF)
- D. It uses the Bellman-Ford algorithm derived from distance vector protocols
Answer: C
NEW QUESTION # 72
A network administrator is implementing NAE on AOS-CX switches. When attempting to create an agent on a particular switch, the agent appears in the NAE Agents panel with a red triangle error symbol and a status of "Unknown".
What is the cause of this issue?
- A. The RESTful API has not been enabled on the AOS-CX switch
- B. A connectivity issue exists between NAE and the AOS-CX switch
- C. The number of scripts or agents has exceeded the hardware's capabilities
- D. The administrator does not have the appropriate credentials to interact with NAE
Answer: C
Explanation:
https://www.arubanetworks.com/techdocs/AOS-CX/10.06/HTML/5200-7717/Content/Chp_TS/err-nae-age-not-cre-db-con-vio-err.htm
NEW QUESTION # 73
A company has a third-party AAA server solution. The campus access layer was just upgraded to AOS-CX switches that perform access control with MAC-Auth and 802.1X. The company has an Aruba Mobility Controller (MC) solution for wireless, and they want to leverage the firewall policies on the controllers for the wired traffic.
What is correct about how the company should implement a security solution where the wired traffic is processed by the MCs?D18912E1457D5D1DDCBD40AB3BF70D5D
- A. Implement standards-based RADIUS VSAs to pass policy information directly to the AOS-CX switches and MCs
- B. Implement downloadable user roles with a device role defined on the AOS-CX switches and MCs
- C. Implement local user roles with a gateway role defined on the AOS-CX switches
- D. Implement downloadable user roles with a gateway role defined on the AOS-CX switches
Answer: C
NEW QUESTION # 74
A network administrator is managing a network that deploys a multicast service. The administrator has multiple streams successfully being routed by PIM-DM in the network. The administrator then adds a new stream with a destination address of 239.0.0.1. However, clients who have not joined the stream are receiving it.
What should the administrator do to fix this problem?
- A. Define the 239.0.0.1 stream on the PIM candidate bootstrap router
- B. Change the destination multicast address to 239.1.1.1
- C. Define the 239.0.0.1 stream on the rendezvous point (RP)
- D. Verify that IGMP is enabled between the switches connecting the multicast source and receivers
Answer: C
NEW QUESTION # 75
......
HP HPE6-A73 exam covers a wide range of topics related to Aruba switching, including virtual local area networks (VLANs), link aggregation, Spanning Tree Protocol (STP), and Quality of Service (QoS). HPE6-A73 exam also covers advanced switching concepts such as virtual switching frameworks, tunneling protocols, and multicast routing. Candidates must have a solid understanding of these concepts and be able to apply them in real-world scenarios.
Understanding huge and explicit pieces of Hewlett Packard Enterprise Aruba Certified Switching Professional Exam
The going with will be inspected in HP HPE6-A73 exam dumps:
- Analyze information that addresses the operational condition of an arrange and decide the fitting activity
- Install and arrange the wired organization arrangement
- Given the execution plan, disclose how to design Layer 2 advancements
- Troubleshoot the wired organization arrangement
- Plan the wired organization arrangement
- Explain Aruba Switch security highlights and setup ideas
- Given a situation with a plan or potentially client necessities, decide a proper execution plan
- Given an execution plan, disclose how to arrange and approve Layer 3 interfaces, administrations, directing conventions and overlays
- Given a situation, decide the reason for the exhibition issue (QoS issue, Configuration issue HW and Software, end hub)
- Given a situation, distinguish an organization disappointment (IP confound, VLAN bungle, equipment arrangement or disappointment, port design)
HPE6-A73 Practice Test Give You First Time Success with 100% Money Back Guarantee!: https://vcepractice.pass4guide.com/HPE6-A73-dumps-questions.html